Used Drilling Rig -- Low Hours ! READY TO WORK with tools

DESCRIPTION

• Hours 3,699

• Tooling:
• RC dual wall Drill Pipe
• 18 joints 20 feet each
• 1 joint 15 feet
• 4 - 30’ Pipe racks
• Standard Drill Pipe
• 28 joints 30 feet each

• Stabilizer 20’ X 24”

• NUMA 210 Hammer
• Two (2) RC 210 26” Drill Bit
• Hours 1,000 each
• RC 210 21” Drill Bit
• Hours – New

• NUMA 300 Hammer
• RC 300 36” Drill Bit
• Hours - 4

• Air Compressors - 45’ Trailer Mounted
• Two (2) Doosan I/R 1170 CFM 350 PSI w/ 300 gal fuel tank
• Hours #1 19,465 rebuilt at 19,000 hours
• Hours #2 18,479 rebuilt at 18,000 hours
• Two (2) Doosan 1070 CFM 350 PSI w/ 750 gal fuel tank
• Hours #3 4,830
• Hours #4 4,756
• Air Manifold to support four air compressor

• Load Safe/Pipe Handler - New

• Accessories:
• Diverters 30” and 20”
• 25 GPM mounted Bean Pump
• 5 GPM spare Bean Pump
• 2 -9 5/8” Air Manifolds to support 2 compressors
• 4 ½” DP Slip and 6” DC Slip
• Slip Bowl
• Spare RC crossover
• Standard Stinger
• 2 -13 3/8 Spinning Heads w/2” threaded ports
• 8”, 6”, 4 ½” Diverter Rubber
• 2 -6 5/8 Reg X 4 ½ IF Crossover saver subs
• Spare Gooseneck
• 4 –Standard drilling roughneck Jaws / 4 -10 ¾ RC Jaws
• 36” Hole Reamer W/26” guide
• 2 -20” Spinning heads w/2” Threaded ports
• Spinning Fork
• Slip plates 30”, 20”, 24”
• Dust sock attachment – new
• 15 -2” HP air hoses
• Front Jack plate / Hole cover
• Air muffler
• Discharge Hose
• 2 –Rig mats / 8’ round hole covers
• 2 -Ramps
• 10 -10’ Flow line
• 5’, 3’, 2’ Flow line
• 3- Flow line 90’s, 2- Flow line 45’s
• J Wrench’s 9 ¾, 9 3/8
• Slip plates 17 ¼, 10 7/8, 10 ¾, 9 1/16, 16 ¼
• 5- Flow line Stands